Heavy Duty Aluminum Skid Plate (2015 Jetta & Passat)

Manufacturer Number: A1008 A2015

$0.00

 Select Vehicle to Check Fitment

NO LONGER AVAILABLE

 Oversize Item

DISCONTINUED ...

Read More...
No Longer Available

DISCONTINUED

The Osiris for 2015 Passat/Jetta Skid Plate Kit Includes:

SKU A1008- 1 Osiris Aluminum Skid Plate. 

SKU A2015- 1 Osiris B7 Passat Hardware Kit, containing: 

2 Blue, Steel Osiris Side Brackets. 

1 Osiris Rivet Nut Installation Tool. 

1 Osiris Passat/Jetta Bolt Kit. 

Volkswagen's oil pans are made of a paper-thin cast aluminum that is easily cracked by many objects such as road debris, manhole covers and speed bumps. While your car may be at stock height, there is only approximately 4 inches of ground clearance with your oil pan. If you are lowered from stock height, there is very little room for error when negotiating an object in your path. Here is some information on this Evolution Aluminum Skid Plate for those of you that haven't seen it before. 

  • 5052 grade aluminum that's 4.8mm (.191 inches) thick.
  • Smooth Finish.
  • Protects the oil pan, radiator, transmission and sub frame.
  • Bolts to pre-existing holes in your frame.
  • Never rusts.
  • Weighs 16.6 pounds (20.2 including hardware).
  • Maximum amount of ground clearance possible provided.
  • Tested in the Northern Canada winter with -40C weather.
  • Less then one hour to install. A user friendly rivet-nut installation tool comes with every kit.
  • Can be installed with or without your stock plastic skid plate.

An oil drain hole that is 98% cut out for TDI only. Finish the cut and you will have an oil drain hole in the skid plate. (Only works if your oil filter is accessed from the top of the engine bay)

Skid Plate and Hardware shipped in separate boxes. No other attachments need to be purchased.

Draft/Design by: EVOLUTION IMPORT INC.

CNC Manufactured for precision guaranteeing a perfect fit.

A detailed easy to follow, step by step guide is only located on our website and not included in the kit. The Install Guide for your kit is: Osiris B7 Passat Install Guide

 

 This item will incur a $20 oversized shipping fee for all orders under $1,000.

Evolution Import designs and manufactures high quality heavy-duty skid plates for VW and Audi models. Made of aluminum, their plates are strong, lightweight and rust-proof.
Volkswagen
  • Jetta TDI Mk6 w/ 2.0 EA288 CVCA Engine (2015)
  • Passat TDI (NMS Chassis) w/ CVCA Engine (2015)

Frequently Asked Questions

Ask us a question

What our customers say...

Love tis skid place. works good also. took a kit to it and didnt do any damage. A little hard to get back on when you remove it for an oil change as is a little heavy.

Rated

Heavy duty skid plate, only problem is that its a pain to remove to service car.

Rated

My unit was not a perfect fit, but a decent one overall. I installed this on a 2015 Passat TDI with a M6 trans The good The plate feels incredibly sturdy after being installed. All of the hardware worked as advertised, and the install of the hardware wasn't especially hard. The bad My skid plate did not match up with both of the supplied brackets. Specifically, the passenger bracket did not line up with its hole at all. The ugly I had to drill a new hole for the passenger bracket and slot said hole with a dremel tool to get a bolt into the passenger bracket. My estimate is that the hole in the passenger bracket was about 41mm too far inboard (toward the middle of the car) vs where the slot was on the skid plate. I have pictures to help demonstrate what I found upon request.

Rated
Shop by Category