Sprinter Maintenance Service A Kit (OM642)

OEM Number: 9068300318 Manufacturer Number: 9068300318

$169.95

List Price: $188.59
You Save 10%

 Select Vehicle to Check Fitment

In Stock

Flat Rate Shipping

Complete "Maintenance Service A" kit for the 2007+ NVC3 Sprinter van with the OM642 engine, including 229.1 approved oil, oil filter and fuel filter. Important information below

Read More...
Available Options
  (+$8.29) ** On Order ETA 04/16/2024
  (+$28.95)
  Name Description Price Select
Oil Filter Wrench 84mm - EXtoil Oil Filter Wrench 84mm - EXtoilOil filter wrench for Mercedes OM642 Diesel Engines, including Jeep Grand Cherokee CRD models and Sprinter Vans. 84mm in diameter. Oil filter wrench for Mercedes OM642 Diesel Engines, including Jeep Grand Cherokee CRD models and Sprinter Vans. 84mm in diameter.... $14.95
15 Liter Oil Extractor 15 Liter Oil ExtractorProfessional grade hand-operated oil extractor with oversize 15L capacity. Professional grade hand-operated oil extractor with oversize 15L capacity.... $159.00

Complete "Maintenance Service A" kit for the 2007+ NVC3 Sprinter van with the OM642 engine, including:

  • 14 liters/quarts of MB 299.51 approved engine oil
  • Oil Filter
  • Fuel Filter (must select proper version below)

An air filter is optional below and is recommended during every 2nd maintenance service.

This kit is customizable.  

The default components in this kit are recommended by IDParts.  However, we also offer a variety of oil options, all of which are approved by Mercedes for 229.51.  Options include:

  • Rowe Hightec Synt RS DLS 5w30- Rowe HC synthesis technology-based, premium, multi-grade, low-viscosity engine oil. Made in Germany. 
  • Total INEO MC3 5w30 - recently reformulated and approved for the latest European diesel requirements, including 229.51 & 229.52
  • Pentosin HP2 - Made in Germany, synthetic 229.51 approved 5w40
  • Liqui Moly LongLife III - Made in Germany
  • OEM Mercedes-Benz fully-synthetic 5w30 oil
  • Mobil 1 ESP X1 0w30 - The new OEM Mercedes dealer oil, we don't recommend this oil for pre-2015 models as they were originally designed to use 5w40 weight oil.

Fuel Filter Selection

There are three different style fuel filters that may be in your vehicle. The only way to tell which style you need is to physically look at the one in your car. You must check your vehicle to see which style you need. See the image to the right for the three styles.

The "01" style filter (has -01- in the part number) and features fuel lines that are offset on one side of the fuel filter, pointing at slightly different angles. There is also a centered Water-In-Fuel sensor element.

The "03" style fuel filter and features two fuel lines that are pointing in the same direction, parallel to each other. They are on opposite sides of the fuel filter, separated by a round heating element in the center.

New 5-Pin Plug Style - in 2012 Mercedes starting using a fuel filter that has a 5-pin plug on top of the filter. The 5-pin plug is for both a fuel heater and water sensor. This plug is built into the feature and cannot be removed.

Fuel Filter Hose Clamps

Mercedes uses pinch clamps at the factory, which are supposed to be replaced each time.  We offer new OEM replacement clamps via the checkbox below. 

IDParts Expert Kits are made for the expert DIY'er or professional. Containing all the parts needed to get the job done, these kits are custom assembled by IDParts using the highest quality components from manufacturers around the world.
Mercedes/Dodge Sprinter
  • Sprinter Gen2 NCV3 w/ OM642 3.0L V6 Turbodiesel (2007-2018)
  • Sprinter Gen3 VS30 w/ OM642 3.0L V6 Turbodiesel (2019-2022)

What our customers say...

Great product, well packaged. On time shipping arrival. Thank you ID Parts

Rated

a good kit

Rated

Rated

Rated

Rated

Rated
Shop by Category